판매

레가(REGA) FONO MM 포노앰프

by 아르페지오 posted Apr 30, 2024
?

단축키

Prev이전 문서

Next다음 문서

ESC닫기

크게 작게 위로 아래로 댓글로 가기 인쇄

REGA FONO MM (4).JPG

REGA FONO MM (10).JPG

REGA FONO MM (16).JPG

REGA FONO MM (21).JPG

REGA FONO MM (27).JPG

레가(REGA) FONO MM 포노앰프입니다.
실물사진입니다.

간단한 세팅으로 아나로그 시스템을 시작할수 있는 REGA 배스트셀링 포노앰프입니다.
MM 전용이며, 음의 밀도감과 밸런스가 좋아 부담없는 가격에 훌륭한 퀄리티의 아나로그 사운드를 들을수 있습니다.

정식수입 220볼트 상태 좋습니다.
판매가는 송료포함 32만원입니다.
광주지역 직거래 가능하고 전국택배 가능합니다.

010-8615-1858
poohlover4364@hanmail.net

Fono MM phono stage has been designed to be effective, easy to use, and above all, to reproduce music. The Fono MM uses a fully discrete, cascaded, complementary amplifier input stage, a configuration designed to optimise the performance of your moving magnet cartridge. Now housed in a brand new redesigned case to match the new Fono MC and Rega's latest range of electronic components offering a modern and sleek look guranteed to integrate in to any hi-fi system.

The RIAA equalization has been split into two stages to minimise interaction. Polyester capacitors have been used in the signal path and polypropylene capacitors are used in the RIAA equalization circuits.

The aesthetic design of the Fono MM was as important as the quality of its electrical capabilities, so it benefits from the same aluminium case as the Rega TTPSU and Fono MC amplifier, giving it a design which offers a familiar feel and moreover brings it in line with its illustrious bigger brothers.

Specifications:

Input sensitivity = 1.7mV for 200mV output
Input loading = 47KΩ in parallel with 100pF
Maximum input level = 60mV at 1KHz
Gain = 41.4dB at 1KHz
Output impedance = 200Ω
Recommended minimum output load resistance = 5KΩ
Frequency response (50KΩ output load) = 15Hz (-3dB) to 100KHz (-0.2dB)
RIAA accuracy (50KΩ output load) = better than +/-0.2dB 100Hz to 100KHz
Power requirements = 24V AC at 80mA maximum.
Only to be used with Rega PS1. 


Articles

1 2 3 4 5 6 7 8 9 10