The Sansui 9090 is a high output version of the 8080 stereo receiver with 110 watts continuous, per channel (minimum RMS) at 1000Hz both channels driven into 8 ohms, with no more than 0.2 % distortion. Sansui 9090은 8Hz로 구동되는 두 채널 모두 1000Hz에서 채널당 110W 연속 (최소 RMS) 110W, 왜곡이 0.2 % 이하인 8080 스테레오 수신기의 고출력 버전입니다.
It has a highly selective FM front-end, through very sophisticated electronic design. 매우 정교한 전자 설계를 통해 매우 선택적인 FM 프론트 엔드를 갖습니다.
Features include four meters: power (each channel); 기능은 4 미터 : 전원 (각 채널); signal strength; 신호 강도; tuning, power protection circuitry and LED indicator, triple tone control with turnover selectors, two tape deck terminal facilities, Dolby FM/4-channel adaptor facility, wide dynamic range from precise phono equalisation system, full range of controls, connections for three sets of speaker systems and FM Multipath detection system. 튜닝, 전원 보호 회로 및 LED 표시기, 회전율 선택기가있는 3 중 톤 제어, 2 개의 테이프 데크 터미널 기능, Dolby FM / 4 채널 어댑터 기능, 정밀한 포노 이퀄라이제이션 시스템의 광범위한 동적 범위, 전체 제어 범위, 3 세트 연결 스피커 시스템 및 FM 다중 경로 감지 시스템.
Specifications 사양
Tuning range: FM, MW 튜닝 범위 : FM, MW
Power output: 110 watts per channel into 8Ω (stereo) 전원 출력 : 채널당 110 와트 (8 into (스테레오))
Frequency response: 10Hz to 30kHz 주파수 응답 : 10Hz ~ 30kHz
Total harmonic distortion: 0.2% 총 고조파 왜곡 : 0.2 %
Damping factor: 10 댐핑 팩터 : 10
Input sensitivity: 2.5mV (MM), 100mV (DIN), 100mV (line) 입력 감도 : 2.5mV (MM), 100mV (DIN), 100mV (라인)
Signal to noise ratio: 70dB (MM), 80dB (line) 신호 대 잡음비 : 70dB (MM), 80dB (라인)
Channel separation: 50dB (MM), 50dB (line) 채널 분리 : 50dB (MM), 50dB (라인)
Output: 100mV (line), 30mV (DIN), 0.75V (Pre out) 출력 : 100mV (라인), 30mV (DIN), 0.75V (Pre out)
Dimensions: 540 x 182 x 397mm 차원 : 540 x 182 x 397mm
Weight: 23.3kg 무게 : 23.3kg
Year: 1975 년 : 1975