엥트레크(ENTREQ) Konstantin 2010 스피커케이블입니다.

북유럽 스웨덴에 위치한 케이블 전문업체 ENTREQ는 목재의 우수성과 접지단자의 중요성을 오디오 케이블에 접목시켜 전제품 모두 수작업 공정으로 제품을 생산하는 메이커입니다.
ENTREQ의 중급라인에 위치하는 KONSTANTIN 은 많은 오디오 매니어와 평론가들에게 성능을 인정받아 ENTREQ 레이블을 세계에 알리는데 공헌한 간판급 모델입니다.
풍부한 정보량에 밀도있는 사운드, 거기에 자연스러운 질감과 극히 안정된 정숙함등 레퍼런스다운 음악성을 들려주는 제품으로 의문의 여지가 없이 최상의 성능을 이끌어내주는 모범적인 케이블입니다.
길이 2.5미터 페어(+2.5m, -2.8m) 양쪽 말굽단자 완제품입니다.

정식수입품이고, 상태 좋습니다.(매장 시연품)
판매가는 송료포함 190만원입니다.
광주지역 직거래 가능하고 전국택배 가능합니다.

010-8615-1858
[email protected]

Entreq Konstantin Loudspeaker Cables

Termination : Entreq Spade to Entreq Spade.
Length : 2.5m.
Original Wooden Box and Packing.

What the Manufacturer says :
The Konstantin line are the mother to all our cables.
Through the years Konstantin line have been gently upgraded with Infinity tech, new dielectric, new connectors and dedicated groundbox.
That makes Konstantin line to be some of the most modern and advanced cables on market today.

Groundbox, and Eartha cable are delivered together with your cable.
Konstantin line have been many users favourite with their open sound, easy flow, quiet background and not at least the price vs performance.

Now upgraded to Infinity level with outstanding performance. Konstantin was Entreqs first product line and gave birth to the principles that the company had been working on for years.

Now in Infinity guise, Konstantin has advanced further but the heart of the design is still the same. The Konstantin is one of the most accessible all-round performing cables. Whether used in an entry-level or high-end system, Konstantin always performs exceptionally well.

What is unique about the Konstantin Line ?
1 Separate cable for positive and negative signals for handle the magnetic fields best way.
This allow us to optimize positive and negative conductors for best performance.
Positive and negative conductors have different demands. Many means that they should have same construction for best phase stability, but the benefits with optimize them separately for their job are in our opinion far bigger.

2 Asymmetrical design
With our construction we can choose different metals as well as the dielectric material for positive and negative conductors. The fact we can use different dielectric means that we can optimize the polarization effect, so it has so little impact on the signal as possible. Also, we can use different length on the conductors for positive and negative conductors and that allow us to minimize the impact on the signal from the magnetic fields.

3 Positive and negative cables are spun clockwise and anticlockwise respectively.
This together with different length and material on positive and negative conductors/cables give the magnetic fields around the positive and negative cable different shape. This way we reduce the cross talking betwen the cables and fields.

4 Adapted lengths to minimise the antenna effect.
All cables act as antennas. They both send out and pick up. Some length act as better antennas then other lengths. In our opinion the optimal length for a cable is 4,40 m. We think that length is the worst antenna that pick up less radiation. However, that is not a practical solution to have all cables in that length and also there will be many other negative influences with long cables. Our cables are in step of 0,55 cm lengths, 1.1m, 1.65m, 2.2m and so on.

5 DIC Dedicated integrated contacts.
We make sure that the area and the mass of the contacts area correspond to the cables area.
In our opinion it´s very important to keep the signal path as straight and clear as possible. We should avoid bottlenecks and big squares for the signal because it will cause time delays for the signal and the result will be muddy sound. We have also found that it´s give big benefits if we use silver for the positive signal and cupper for the negative. There are also big differences between solid pins or tubes in the connector. A tube gives better flow for the signal compared with a solid pin.
Think of the cable as a Highway. If the access and slip roads are well constructed and in good condition the traffic will flow easy. If it´s the opposite, you will get traffic jam and accidents, no matter how good and well-constructed the rest of the road is.

6 Wood in the contact framework. Non-magnetic and non-conductive.
All metals are magnetic in one way or another. Even metals/plastic that we say are non- magnetic are
paramagnetic and have influence on the signal. Wood have no impact on the signal and let the metal in the connectors signal path work the way we expect.

7 Only pure copper or/and silver in the signal paths. No alloys
And no metal just for good looking!! You never see any metal on a Entreq cable if the metal not carry signal. Many other brands use big shiny metal parts on the cables for the good look. But this will be a part of the dielectric and affect the sound quality.

8 Drain wire instead of shielding in order to connect to a pure earth point (External Earth Drain System)
A common shield of aluminium ot cupper will also be a part of the dielectric and give undesired results.
Instead we use Infinity treated drain wire of Cupper or Silver which have less affect on the signal, but still protect against radiation.The high pressure treated drainwires (Infinity system) are superior comparing with all other kind of wires or shields. The Infinity treatment makes the drain work in much higher frequencies.

9 EEDS External Earth Drain System
This entails the shielding / drain wire not being connected to the devices negative pole that is the common way. When uou do it that way you mix the signal and the pollution just before it enters the device. The result will be that you get it all in the signal/device.
With our EEDS system you keep pollutions and signal separated all the way, from source to receiver. Since the drain wire with the pollutions are connected to another external earth point, (One of our ground boxes is suggested. And here we recommend you to carefully choose Eartha cables and ground box for best result.) the pollutions go to groundbox and the signal go separated and clean to the device. This way, we drain off the interference/noise that the shielding absorbs to the groundbox outside of the signal paths. A big improvement when we keep it separated instead of mix it together just before the process in the receiving device.

10 Cotton covering instead of synthetic materials
The sleeve automatically be a part of the dielectric. If using plastic sleeve, you add characteristic to the cables. Some manufacturers want this, but we prefer to add so little features as possible.