판매

에코(EKCO) EV-80M 진공관 모노블럭 파워앰프(전시품세일)

by 아르페지오 posted May 09, 2024
?

단축키

Prev이전 문서

Next다음 문서

ESC닫기

크게 작게 위로 아래로 댓글로 가기 인쇄

EKCO EV-80M (1).JPG

EKCO EV-80M (2).JPG

EKCO EV-80M (9).JPG

EKCO EV-80M (12).JPG

EKCO EV-80M (15).JPG

EKCO EV-80M (25).JPG

EKCO EV-80M (29).JPG

에코(EKCO) EV-80M 진공관 모노블럭 파워앰프(전시품세일)입니다.

출중한 구동력과 음악적 밸런스가 매우좋은 KT120 진공관을 사용한 에코(EKCO)의 모노블럭형 파워앰프입니다.
채널당 80와트 출력(트라이오드 모드시 55와트)으로 뛰어난 다이나믹스와 높은 음압레벨에서도 스피커를 자유롭게 컨트롤 할수 있습니다.
현대적이면서도 정연한 음악적 밸런스와 깊고 중후한 음색이 매력적인 파워앰프입니다.
입력단은 RCA 2계통, 스피커는 2조(A/B) 지원합니다.

정식수입 220볼트, 신품입니다.
판매가는 송료포함 600만원이고 전시품 1대 470만원에 판매합니다.
다른제품과 절충교환 가능합니다.
광주지역 직거래 가능하고 전국택배 가능합니다.

010-8615-1858
poohlover4364@hanmail.net

EV80M
Mono Vacuum Tube Power Amplifier

The EKCO EV80M implements our signature valve amplification techniques into a mono power amp, for a beautifully intricate performance in its purest form.

Using a combination of 1 x 6SN7GT, 2 x6SL7GT and 2 x KT120 valves, users can toggle negative feedback operation, triode / ultra-linear modes and speaker A/B outputs, proving an adaptable amp for different speakers, sound sources and musical tastes.

Specifications

>90dB Signal/Noise Ratio
1V RMS Input Sensitivity
Input Impedance 100K Ω
Output Impedance 4 / 8 Ω
230V, ± 5%, 50Hz Power Supply
160W Max. Power Consumption
1 x 6SN7GT, 2 x 6SL7GT, 2 x KT120 Valves
236mm x 241mm x 453mm (HxWxD)
20.5kg Net Weight
2 x single RCA inputs
2 x Speaker Terminal Outputs
Ground Connection
Speaker A/B Select
Ultralinear / Triode Mode
Adjustable Negative Feedback
18Hz ? 35kHz Frequency Response (±1dB)
1 x 80W Output Power (Ultralinear Mode)
1 x 55W Output Power (Triode Mode)
<1% at 1kHz Total Harmonic Distortion

Triode or Ultralinear

The EKCO EV80M lets its listener choose between the channels Triode mode (50 Watts RMS) and Ultra-linear mode (80 Watts RMS). The triode push-pull output stage is the choice for many audiophiles for its detailed and pure sound quality. Triodes are delicate valves which have limited output, so for driving higher powered speakers Ultra Linear mode is ideal. By connecting the screen grid to a special tapping on the output transformer a local feedback loop is incorporated around the output valves, lowering their output impedance, linearising the output and massively reducing distortion. The result is an amplifier with most of the advantages of the triode combined with the efficiency and power of a multi-grid valve.

Overall Negative Feedback (NFB) Switchable

The EV80M is equipped with an Overall Negative Feedback (NFB) switch. This is a process where a percentage of the output of an amplifier is fed back to the input in reverse (negative) phase. This lowers the output impedance and reduces distortion to improve overall frequency response.

As NFB at high frequencies can cause instability at high frequencies with awkward loudspeakers we recommend with horn loudspeakers that triode operation with low NFB is the way to go, however with conventional, low sensitivity loudspeakers Ultra linear mode with high NFB would be a suitable choice. Either way, we've made the EV80M as flexible as possible to cater for different speakers, sound sources and tastes.

Retro Charm

The EV80M's steel chassis is sandwiched in between matched, handcrafted solid wood panels (Deep Louro Petro) in piano gloss finish. It's design influenced by Ekco's original bakerlite FM radios with a modern twist to match the most stylish of living rooms.


Articles

1 2 3 4 5 6 7 8 9 10