판매

BECKMAN COULTER OPTIMA L-100XP ULTRA CENTRIFUGE 초고속 원심분리기

by 김기철 posted Feb 17, 2021
?

단축키

Prev이전 문서

Next다음 문서

ESC닫기

크게 작게 위로 아래로 댓글로 가기 인쇄

BECKMAN COULTER OPTIMA L-100XP ULTRA CENTRIFUGE 초고속 원심분리기 판매합니다

상태양호
연락처 : 010-5354-6248
 
 
Beckman Coulter Optima L-100XPultracentrifuge
 
The Beckman Coulter Optima L-100 XP Ultracentrifuge brings you fast turn arounds 
thanks to its powerful onboard software, efficient methods, and innovative rotors. 
 
This ultra-centrifuge features an intuitive touch screen to help users be more effective, 
almost a limitless number of user programs and will even simulate results 
before performing separations to help check optimization. 
 
The Beckman Coulter Optima L-100 XP Ultracentrifuge features an energy efficient air cooled drive, 
constructed of high performance materials that allow it to reach speeds of up to 100,000 rpm, 
and a maximum g-force of 802400 x g.
 
 
 

 

The drive of this ultracentrifuge is also imbalance tolerant, and can safely accommodate tubes 
that are under or over filled by as much as 10%. 
 
The Beckman Coulter Optima L-100 XP Ultracentrifuge has 10 acceleration and 11 deceleration profiles, 
that include 9 slow rates as well as coasting to a stop without brake, or full dynamic braking from set speed. 
This floor model centrifuge has quiet operation at <53 dBa, 
so you can have it in the lab nearby without being too distracting. 
 
The temperature range of this ultracentrifuge can be set between 10 to 40°C in 
increments of 1° with a thermo electric refrigeration system and a moisture purging vacuum system.  
Contact us today to learn more about our Beckman Ultracentrifuge.
 
 
Beckman Coulter L-100XP Ultracentrifuge Specifications:
 
Approximate Acceleration Time:    10 acceleration profiles–9 slow rates or maximum acceleration from 0 to set speed
Approximate Deceleration Time:    11 deceleration profiles–9 slow rates, coasting to a stop without brake, or full dynamic braking from set speed
 g Force:                      802,400 g (Type 100 Ti)
Imbalance Tolerance:         ±5 ml or 10% whichever is greater
Max Speed:                     100,000 rpm
Maximum Heat Dissipation into Room under Steady-State Conditions: 1.0kW/hr (3400 BTU/hr)
Noise Level 1 Meter in Front of Centrifuge: <53 dBa
Set Speed:                     0 to 40° C in 1° increments
Temperature Control:         ±0.5° of set temperature (after equilibration)
Ambient Temperature Range:        10 to 40°C ambient
Clearances Required:          5.1 cm (2.0 in) sides; 15.2 cm (6.0 in) rear
Humidity Restrictions:          < 95% (noncondensing)
Pollution Degree:                        2
Time – Actual Display:          Indicates time remaining in timed runs, time elapsed in Hold runs, or estimated time          remaining in Ω2t runs
Vacuum:                                  Moisture-purging vacuum system
Finish:                                  Control panel: coated polycarbonate. Top surface: urethane paint. Other surfaces: general purpose paint.
Dimensions H x W x D         49.5 x 37 x 26.5 in (125.7 x 94 x 67.3 cm)
Weight:                                 465 kg (1025 lb)
 
http://www.koreasc.co.kr/shop/item.php?it_id=1602679874



 


Articles

1 2 3 4 5 6 7 8 9 10