1.JBL K2 시리즈및 혼형 시스템에 최적의 메칭을 보입니다.
2. 판매가는 150 만원이며 다른기기와 절충교환 가능합니다.
3,첼로오디오 010-8678-2505
JBL Synthesis S800 2 x 200 Watt, 1 x 800 Watt Power Amplifier
Power Bandwidth 5Hz - 100kHz +0, -3dB
Power Output 200 Watts in Stereo mode into 8 ohms;
800 watts in Bridged mode into 8 ohms
Sensitivity (2.83V @ 1m) 1V in = 100 watts out (THX® standard)
1.4V in = 200 watts out
Signal-to-Noise Ratio >100dB
Input Level/Impedance 28k Ohms
Distortion <0.03%
Damping Factor (8 Ohms): >400
Total Harmonic Distortion <0.03%, 20Hz - 20kHz
Dimensions
(H x W x D) 7" x 19" x 17-1/2"
178mm x 254mm x 444mm
Weight 70 lb/32kg
Power Consumption 2400 Watts Maximum
BTU Per Hour 5810 BTU Average
8200 BTU Maximum
The JBL S800/230 power amplifier! embodies the best of what JBL has learned about the emotional power of audio reproduction in over fifty years of pre-eminence in the field. This amplifier has been designed and crafted to provide the user with a high level of sonic performance; special attention has been paid to minimize the number of components in the audio signal path, resulting in extremely low distortion, excellent transient response, and wide dynamic range.
Features
The JBL S800/230 power amplifier features the following:
THX® Ultra Specifications
This amplifier meets or exceeds the stringent specifications set by the Lucas - film - THX Audio division in their specifications for "Ultra"-class certification, including power handling, total harmonic distortion, frequency response, signal to noise ratio, slew rate, and crosstalk. When incorporated into a complete THX system, you will hear in your home what the director and sound engineer heard in the recording studio.
Multi-Channel Operation
The S800/230, a two channel amplifier that can also be operated in bridged-mode as an extraordinarily powerful single-channel amplifier that will astound the listener with its power and realism.
High Power Capability
The S800/230 provides a truly satisfying 200 watts per channel of clean audio (<0.03% THD) into eight ohm loads, and 800 watts when operated in bridged-mode into an eight ohm load, making it ideal for powering less efficient speakers. Because of their power capabilities, all Synthesis amplifiers have an extremely wide dynamic range, an element critical to realistic home cinema. Sound pressure levels equal to those present at original performances are easily recreated in even the largest of home listening environments.
Quiet Cooling
The S800/230 utilizes a fan to cool the amplifier channels, ensuring long-term reliability. To reduce fan noise to an absolute minimum, a thermal sensing and control circuit has been incorporated in the Synthesis S800/230 that senses increases in temperature within the amplifier and powers a fan at a speed proportional to that temperature increase. When the S800/230 is "loafing", the fan turns very slowly – and quietly.
At high listening levels (and the higher operating temperatures this creates within any amplifier), the sensing circuitry causes the fan to turn faster, producing increased cooling. As a result, the fan is never turning faster than necessary, and the noise that is generated is masked by the program being listened to.
Rated Power Output:
200W in stereo mode into 8 ohms -- 800W in bridged mode into 8 ohms
THD:
< 0.03% 20Hz - 20kHz
Input Impedance:
28k ohms
Sensitivity:
1V in = 100 watts out (THX Standard) 1.4V in = 200 watts out
Frequency Response:
( at 1 W ) 20Hz - 20kHz +0, -0.25dB
S/N Ratio ( A-weighted at rated power ):
≥ 100dB
Damping Factor ( 8 ohms ):
≥ 400
Power Bandwidth:
5Hz - 100kHz +0, –3db
IM Distortion:
≤ 0.03%
Unit Size:
7” H x 19” W x 17 ¹⁄2” D — 178 mm x 484 mm x 444 mm
Unit Weight:
70 Ibs — 32 Kg
Shipping Weight:
82 Ibs — 37 Kg
All features and specifications are subject to change without notice
