알텍 4665와 4629 인풋의 차이점이 무엇인지요
먼저 경험하신 분들의 조언을 듣고 싶습니다
알텍 4665와 4629 인풋의 차이점이 무엇인지요
먼저 경험하신 분들의 조언을 듣고 싶습니다
Peerless Altec 4665 input transformer is Altec’s similar but different junior sized version of the K241D..
For those who wish to know a little more about the Peerless Altec K241D & 4665...
When ALTEC was spun off from the Western Electric Co. they arrived with the product designs of the Electronic Research Products Division of WECO, including the expertise to design and build very excellent audio transformers which were marketed as Peerless Transformers from the Peerless Electrical Products Division of Altec Lansing. As Peerless Division manager Ercel Harrison once said: “Never use transformers because they degrade the signal... However, when you have no other choice,
get the best damn transformer you can find.” Peerless Transformers fulfilled that need for many years to follow.
In the 1950’s, Peerless designed the legendary K241D to provide balanced line level inputs for balanced tube amplifiers such as the Altec 260A. Peerless also designed a similar but slightly different 4665 to provide balanced line level inputs for unbalanced tube amplifiers such as the Altec 128A. The 4665 was also used in the reverse direction to provide a balanced low impedance output from the Altec 165A/21BR Tube Type Condenser Microphone System. The specification sheet for the 4665 claims “90 dB of magnetic shielding” and a “frequency response ± 1 dB from 10 to 25,000 cps” at a maximum level of “0 dB (6 mW Ref)” Ideal for feeding an unbalanced tube input. By contrast, the K241D is capable of handling a maximum level of “+8 dBm” into a “balanced” load.
Both have similar primary windings and electrostatic shields between the primary and secondary windings.
These are very different transformers, but with very similar capabilities.
제가 이전에 인터넷에서 서핑해서 찾아둔 글 올립니다. 언밸런스를 위해서 4665를 만들었다고 하네요. k241은 밸런스용이구요. 결론은 맨밑글에 다른 트랜스포머이지만, 성능은 매우 비슷하다.. 라고 결론내렸지만, 시장 가격이 다 이유가 있겠지요. 전문가가 아니라 이정도 밖에 모르겠습니다.
김귀환님 결론이 거의 정답인거 같습니다. ^^
번호 | 분류 | 제목 | 글쓴이 | 날짜 | 조회 수 |
---|---|---|---|---|---|
공지 | 기타 | 알텍 동호회 공지사항 1 | 소리전자 | 2004.02.16 | 12071 |
1215 | 질문 | 풀레인지 질문드립니다 | eric | 2018.10.17 | 240 |
1214 | 질문 | 알텍8인치 풀레인지 유닛 구합니다 | 장호기 | 2020.11.10 | 251 |
1213 | 질문 | 넽웍문의 | 전태준 | 2018.01.18 | 292 |
1212 | 질문 | 이 음원을 알고 계시는 분..도움 부탁드립니다 4 | 조태제 | 2021.03.21 | 313 |
1211 | 질문 | A 5 에사용할 상태양호한 오리지널 스피커통구합니다 | 박춘애 | 2018.02.19 | 319 |
1210 | 질문 | A4 300헤르츠 네트워크 회로 자문 구합니다 | 이상기 | 2017.01.09 | 325 |
1209 | 질문 | - 모듈에 대한 느낌 | -아날로그- | 2020.11.08 | 329 |
1208 | 질문 | 오리지널 알텍 612 통 구합니다 | 이정기 | 2017.02.02 | 339 |
1207 | 질문 | MR902-16hf 콘덴서질문 2 | 테리 | 2019.06.11 | 353 |
1206 | 질문 | [질문] 트랜스포머방식 어테뉴에이터에 관한 질문.. 2 | 강석린 | 2019.04.22 | 357 |
1205 | 질문 | 극장용 인클로저 825의 시리얼넘버?? | 한지영 | 2018.09.05 | 378 |
1204 | 질문 | 알텍 혼 329A 와 311 - 90 비교 !! | 텔레맨미디어 | 2017.09.11 | 393 |
1203 | 질문 | 알텍 817통 구입합니다. | 김준철 | 2023.03.19 | 400 |
1202 | 질문 | 알텍353a 인티앰프 질문 2 | 남형우 | 2019.05.08 | 406 |
1201 | 질문 | ALTEC 604C 또는 604D Hole mount 도면 부탁드립니다. | 홍종철 | 2017.05.05 | 408 |
1200 | 질문 | 피어리스 k-221q승압트랜스 1 | 로딩중 | 2017.12.16 | 409 |
1199 | 질문 | 416-8 a ~ 416 - 8z 우퍼 1 개씩 구입건 | 박영혜 | 2016.09.12 | 410 |
1198 | 질문 |
288-8L의 스피커단자 부분이 문제가 있어 문의드립니다
![]() |
문재웅 | 2014.03.19 | 421 |
1197 | 질문 | 알택515a 나 b 우퍼한조 구입해보려합니다 헐리욷버전 콘지 오리... | 신성규 | 2019.09.08 | 435 |
1196 | 질문 | 알텍 네트워크 자작용 철심코일 질문 | 이무남 | 2018.08.13 | 439 |
제가 아는 한도내에서 4665,4629, k241d 스펙은 모두 같습니다
모두 피어리스사 제조 이구요
다만 연결부위가 러그,소켓, 리드선등의 편위위주로 그부분만 다르다고 알고 있습니다
그러나...
분명 승압 트랜스를 들어보면 k241d가 소리가 좋게 들립니다 구형의 경우 이구요 신형 보다는 구형 4665, 4629가
청감상 좋은건 확실 합니다
저만 그렇게 느끼는것 같지 않습니다 그래서 그런지 가격도 월등 차이를 보입니다